UFOブースター内蔵屋外用及びべランダ用地上デジタル放送アンテナ
¥8,099.00
在庫あり
详情：
全方位受信とスマートパス技術を搭載したAT-JP416Bは受信の範囲を増幅します。放送発信源からの0、50、65KM受信出来ます。より多くのチャネル受信とより少ない盲点が保証出来ます。
ANTOP新時代デジタル技術
• スマートパスブースターはANTOPの独占技術物です。一体化の設計を採用したので、接続が簡単になります。そして、短距離受信と長距離受信の間の正確なバランスを取ります。
• 5G LTEフィルター。ANTOPはフィルターを全ての増幅製品に内蔵して、3G、4G及び5G無線信号をブロックするノイズがないデジタルテレビ受信のアンテナを作成する最初のメーカーです。
• 各ANTOPアンテナは、国際的な製品技術者のチームによってサポートされ、最高品質の製品を確実に受け取ることが保証出来ます。
AT-JP416Bスマートパス増幅屋外用及びべランダ地上デジタル放送アンテナの特徴
クイック、簡単な取付と可選設置
壁面/ポールマウントキットを使用して適切な外部場所に固定し、または直接に壁面に取り付けます。本アンテナは多様の配置場所を提供します。
室内、屋外及びモバイルの場所に最適
家庭用だけでなく、RVにも最適。
フラットタイプの耐久性設計、抗UV及び防水外観
硬質ABSプラスチックケースは、天候から内部の要素を保護しながら、フラットタイプの耐久性設計は視覚的なアピールを提供します。
箱内の物
• AT-JP416B UFOスマートパス増幅屋外用及びべランダ地上デジタル放送アンテナ(サイズ:33×20.4×0.2cm)
• USBケーブル
• 屋外ブラケット
• 5m同軸ケーブル
• ブースター用電源装置
• 壁面/ポールマウントキット
• 取扱説明書
仕様 | |
| 用途 | Outdoor, Attic, RV, Marine |
|---|---|
| 信号強度 | 中電界地域 |
| 受信帯域 | UHF |
| 増幅 | Smartpass アンプ搭載 |
| 周波数範囲 | 87.5-230MHz, 470-700MHz |
| 利得 | Switch OFF: 9dB; Switch ON: 19dB |
| 最大出力レベル | 100dBuV |
| ノイズフィギュア | ≤3dB |
| インピーダンス | 75Ω |
| 電源 | DC12V via power adapter |
| ケーブル長さ | 16ft |
| 製品シリーズ | UFO |
| 動作温度範囲 | -104 to 140 ℉ |
| 製品ステータス | New |
| 風図 | 6 mile/h = 0.15N ; 10 mile/h = 0.54N |
| カラー | ホワイト |
| UPC | 856134006469 |
消費者包装 | |
| 重さ | 1.835 kg |
|---|---|
| サイズ | 16.5 × 13 × 23.5 cm |
質問
Pat Costa –
Is this antenna directional? Is there a front and back?
(0) (0)
Anamarie –
Hello,
This antenna is an Omni Directional and will give you a 360 degree range. Keep in mind, although the range is 65 mile, it is in diameter.
(0) (0)
Michael B. –
This antenna really works great. At first I was going to return it thinking it’s no good, I had a flat panel indoor antenna that picked up a lot more channels at first although not very strong signals. I found out through experience that with strong signal comes great tv viewing. Let me say I am new to this type of tv viewing. And I like it. So back to this antenna. When I first hooked it up I wasn’t impressed with it. I said it deserves a little more effort on my part to see it something is causing poor reception. So I’m thinking most of my stations are to the south and my antenna is facing to the north. Also my roof pitch is higher to the south. So I decided to raise the antenna 3 feet and then somewhat point it in the direction where I thought the towers were to the south and Bam. 75 mostly 5×5 signal strength Channels were found. It’s such a pleasure watching tv when it clear and audio is perfect. I haven’t even fine tuned this antenna. I have a signal strength meter on order when it comes in I will fine tune this antenna at a later date an who knows how many channels I will get. This is amazing how much free tv this antenna gets. This antenna may or may not give you the same results but make sure you at least try different arrangements for this antenna before you consider it junk in a review. It just might not be the right antenna for your situation, I was actually going to order another antenna until I experimented a little bit and now I am 100% happy with this one.
(0) (0)
Jonathan –
I mounted the antenna in our attic and was able to go from 4 channels with a window antenna to 26 with this one. I now receive all of my locals (which was the goal). By looking at the map the range is impacted by line of sight issues (mountains), but this is to be expected. I don’t think the next model up (AT-414b) would have actually worked any better. I am happy with the purchase. The install can be as simple or difficult as you make it.
(0) (0)
Steve –
I got sick of the thin window antennas in our house and mounted this antenna up on my chimney. The old antennas needed to be in the perfect spot and were an eye sore. This new antenna is great. I live less than 10 miles from a major metropolitan area and reception is perfect, without turning the amplifier on. I love that this antenna is small.
It feels like it weighs less than a pound and I secured it to my chimney with Tapcon anchors. I then wired it to my living room and basement TVs. I didn’t even have to reset the channels, it just worked.
Of note, whether you turn the amplifier on or not, it must be plugged in. I found this out after installation.
(0) (0)